指标功能：[B]国产软件[/B]
指标类型：简体中文
所需积分：0
推荐星级：
授权方式：共享版
公式大小：0 Bytes
更新时间：2014-04-13 22:14:00
公式简介:

发一个自用的通达信MACD指标吧。无未来，也不是完全原创。
其实MACD的精华就8个字：买小卖小，缩头缩脚。一个单独的MACD并不能说明多大问题，但各种优化的的指标结合共振就有一定意义了。

各种背离信号和文字颜色是一致的。空心柱为背离信号。MACD二次金叉会文字提示。


{MACD的精华就8个字：买小卖小，缩头缩脚。小指的是，红绿柱的堆而言，
缩头缩脚是指红绿柱的长短而言。当股价一波比一波高时，反而红柱的堆，
一堆比一堆小，证明产生了顶背离现象，应该及时卖出；当股价一波比一波低时，
反而绿柱的堆一堆比一堆小，证明产生了底背离，应该买进。买点在绿堆小时，
一根比一根短买进，也就是说缩脚时买进。当红堆小时，红柱一根比一根短时，
叫缩头，卖出。这里的“大”和“小”是指MACD中的大绿柱，小绿柱，
和大红柱，小红柱。而在操作时图中的DIF和MACD两条白色和黄色的曲线，
一般是视而不见的，我们只注重红绿柱的变化。}
{在牛市行情里，该指标准确率更高！我对MACD的理解是,当股票下跌时，
将MACD设置为三个步骤来操作:
买入法则:
1)当.MACD绿柱由长缩短时可以考虑买1/3;
2).当DIFF由下降转平或调头向上时再买1/3;
3).当DIFF由下向上上穿DEA(即金叉)时就可以全仓买进了（也就是剩下1/3买进）;
当股票上升到一定的幅度时,卖出法则:
4).当MACD柱由长红开始缩短时,可以考虑卖出1/3;
5)当DIFF由上升开始走平或向下时,再卖出1/3;
6).当DIFF下穿DEA(即死叉)时,就将剩下的1/3全仓卖出!}
{本指标使用了快速MACD系统，比系统自带灵敏度更高，且结合和KDJ,RSI指标中的顶底背离}
{MACD}
DIFF:EMA(DCLOSE,12)-EMA(DCLOSE,26);
DEA:EMA(DIFF,9);
MACD:=(DIFF-DEA)*2;
{STICKLINE(C>0,0,0,0,1);}
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
B1:=REF(C,A1+1)>C AND REF(DIFF,A1+1)<DIFF AND CROSS(DIFF,DEA);
A2:=BARSLAST(REF(CROSS("KDJ.K"(9,3,3),"KDJ.D"(9,3,3)),1));
B2:=REF(C,A2+1)>C AND REF("KDJ.K"(9,3,3),A2+1)<"KDJ.K"(9,3,3) AND CROSS("KDJ.K"(9,3,3),"KDJ.D"(9,3,3));
A3:=BARSLAST(REF(CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24)),1));
B3:=REF(C,A3+1)>C AND REF("RSI.RSI1"(6,12,24),A3+1)<"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24));
C1:=BARSLAST(REF(CROSS(DEA,DIFF),1));
D1:=REF(C,C1+1)<C AND REF(DIFF,C1+1)>DIFF AND CROSS(DEA,DIFF);
C2:=BARSLAST(REF(CROSS("KDJ.D"(9,3,3),"KDJ.K"(9,3,3)),1));
D2:=REF(C,C2+1)<C AND REF("KDJ.K"(9,3,3),C2+1)>"KDJ.K"(9,3,3) AND CROSS("KDJ.D"(9,3,3),"KDJ.K"(9,3,3));
C3:=BARSLAST(REF(CROSS("RSI.RSI2"(6,12,24),"RSI.RSI1"(6,12,24)),1));
D3:=REF(C,C3+1)<C AND REF("RSI.RSI1"(6,12,24),C3+1)>"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI2"(6,12,24),"RSI.RSI1"(6,12,24));
MACD底背:IF(B1>0,-0.1,0),COLORRED{POINTDOT};
STICKLINE(B1>0,-0.3,0,2.5,1),COLORRED;
KDJ底背:IF(B2>0,-0.1,0),COLORFF00FF,{POINTDOT};
STICKLINE(B2>0,-0.3,0,2.5,1),COLORFF00FF;
RSI底背:IF(B3>0,-0.1,0),COLORYELLOW,{POINTDOT};
STICKLINE(B3>0,-0.3,0,2.5,1),COLORYELLOW;

MACD顶背:IF(D1>0,0.1,0),COLOR00FF00,{POINTDOT};
STICKLINE(D1>0,0.3,0,2.5,1),COLOR00FF00;
KDJ顶背:IF(D2>0,0.1,0),COLORFFCC66,{POINTDOT};
STICKLINE(D2>0,0.3,0,2.5,1),COLORFFCC66;
RSI顶背:IF(D3>0,0.1,0),COLORWHITE,{POINTDOT};
STICKLINE(D3>0,0.3,0,2.5,1),COLORWHITE;
{画零轴上下线}
STICKLINE(MACD>=0 AND MACD>=REF(MACD,1),0,MACD,0,0),COLOR0000CC;
STICKLINE(MACD>=0 AND MACD<=REF(MACD,1),0,MACD,0,0),COLOR0099FF;

STICKLINE(MACD<=0 AND MACD<=REF(MACD,1),0,MACD,0,0),COLORFF9900;
STICKLINE(MACD<=0 AND MACD>=REF(MACD,1),0,MACD,0,0),COLOR99CC00;
{红蓝箭头标注}
多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
DRAWICON(多转空,MACD,2);
DRAWICON(空转多,MACD,1);
低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
DRAWTEXT(低位金叉,DEA,'低位金叉'),COLORFF00FF;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.2,2,0),COLORFF00FF;
DRAWTEXT(二次金叉,DEA*1.06,'二次金叉'),COLORRED;
{A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
顶背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
DRAWTEXT(顶背离,MACD+0.5,'顶背离'),COLORWHITE;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
底背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
DRAWTEXT(底背离,MACD-0.5,'底背离'),COLORWHITE;}
{DIFF,COLORGREEN;
DEA,COLORYELLOW;}
强:IF(DIFF>MA(DIFF,2),DIFF,DRAWNULL),COLORRED;
弱:IF(DEA>MA(DEA,2),DEA,DRAWNULL),COLORMAGENTA;

{标注斐波那契数字}
TJ:=MACD>0;
T:=MACD<0;
A:=LLV(MACD,50)=MACD;
DRAWICON(A AND FILTERX(A,20), MACD,1);
{DRAWTEXT(BARSLAST(TJ)=1,MACD-0.1,'1'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=2,MACD-0.1,'2'),COLORYELLOW;}
DRAWTEXT(BARSLAST(TJ)=3,MACD-0.2,'3'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=5,MACD-0.2,'5'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=8,MACD-0.2,'8'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=13,MACD-0.2,'13'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=21,MACD-0.2,'21'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=34,MACD-0.2,'34'),COLORYELLOW;
DRAWTEXT(BARSLAST(TJ)=55,MACD-0.2,'55'),COLORYELLOW;

{DRAWTEXT(BARSLAST(T)=1,MACD+0.1,'1'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=2,MACD+0.1,'2'),COLORGREEN;}
DRAWTEXT(BARSLAST(T)=3,MACD+0.2,'3'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=5,MACD+0.2,'5'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=8,MACD+0.2,'8'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=13,MACD+0.2,'13'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=21,MACD+0.2,'21'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=34,MACD+0.2,'34'),COLORGREEN;
DRAWTEXT(BARSLAST(T)=55,MACD+0.2,'55'),COLORGREEN;
 

[url=http://www.goodgupiao.com/gupiaogongshi/33362.html][B]优化MACD结合斐波那契和各种顶底背离，副图指标[/B][/url]